Jet Pressure Set
Stuart Turner Jet 55-45 PS 46617
In stock
- Established 1975
- Trusted by thousands of customers
Jet 55-45 PS – Centrifugal Pressure Set
Ideal for the high pressure delivery of clean non-potable water from a water tank/cistern in either a positive or negative head application.
Jet Pressure Sets include a 24 litre diaphragm tank providing a buffer of 12 litres of pressurised stored water and are supplied with a power lead fitted with a 13 amp fused plug.
The range is suitable for general purpose use, pumping cold water.
More about this product
Technical Specification
| General | |
| Product code | 46617 |
| Guarantee | 1 year |
| Features | |
| Pump type | Centrifugal |
| Mechanical seal | EPDM / Carbon / Ceramic |
| Fully automatic control | |
| 24 litre diaphragm tank | |
| Built in 'no water' cut out | |
| Positive and negative head application | |
| Quiet operation | |
| Performance | |
| Maximum head (closed valve) | 4.5 bar |
| Performance @ 10 l/min | 3.5 bar |
| Performance @ 40 l/min | 1.6 bar |
| Maximum flow | 55 l/min |
| Minimum static inlet pressure | 0.1 bar (1 metre) |
| Maximum static inlet pressure | 0.5 bar (5 metres) |
| Maximum static outlet pressure | 1.3 bar (13 metres) |
| Maximum working pressure* | 500 kPa (5 bar) |
| Maximum ambient air temperature | 40 °C |
| Min / Max water temperature | Min 4 °C / Max 35 °C |
| Maximum suction lift | 5 metres |
| Cut out flow | 1 l/min (approx) |
| Cut in pressure | 180 kPa (1.8 bar) |
| Pressure vessel air pre-charge | 2.0 bar (29 psi) |
| Connections | |
| Pump connections | G 1 female |
| Motor | |
| Type | Induction, auto-reset thermal trip |
| Duty rating | Continuous (S1) |
| Electrical | |
| Power supply/phase/frequency | 230 V a.c./ 1 / 50 Hz |
| Current (full load) | 2.9 Amps |
| Power consumption | 640 Watts |
| Fuse rating | 13 Amps |
| Power cable (pre-wired) | 1.5 metres |
| Physical | |
| Enclosure protection | IPX4 |
| Length | 521 mm |
| Width | 280 mm |
| Height (excluding hoses) | 700 mm |
| Weight (including fittings) | 13.2 Kg |
* The maximum pressure that can be applied to the pump under any installation conditions.
-
instructions PDFDownload
-
data sheet PDFDownload
-
performance PDFDownload
-
dimensions PDFDownload
Standard delivery:
Standard delivery is free for all orders except for some low cost/low margin items where standard delivery is £6.50. Some difficult to transport goods also have a varying carriage charge applied.
Please contact us for the estimated standard delivery times of the products that we have in stock, either by calling 01473 719950, or by dropping us an email at info@anglianpumping.com.
Deliveries will typically be made between 7am and 6pm, Monday to Friday (excluding public holidays).
Next day delivery:
Next working day delivery is available for a £15.00 + vat delivery charge.
Orders must be placed before 12 noon to qualify for next working day delivery. Orders placed after 12 noon on Thursday but before noon on Friday will be delivered the following Monday. Orders placed after 12 noon on Friday will be delivered on Tuesday.
Related products
For a self-priming pump suited to domestic applications, look no further than the DAB JET Pump collection. With impressive suction capacity even when interacting with…
Pump sets equipped with Active Driver are designed and built to meet the constant pressure requirements imposed by modern water distribution system technology.
The Grundfos CMBE booster is a compact booster system for water supply in domestic applications. The integrated speed controller enables the CMBE to keep constant…
DAB twin AD variable speed booster pump sets specifically suitable for domestic applications and small systems for civil, agricultural or industrial uses.
DAB twin booster pump sets specifically suitable for domestic applications and small systems for civil, agricultural or industrial uses.
DAB single variable speed booster pump sets specifically suitable for domestic applications and small systems for civil, agricultural or industrial uses.