DAB DTRON Pumps
DAB DTRON 3 45/90 WRAS (1~ 230V) – 60197750
In stock
- Established 1975
- Trusted by thousands of customers
DTron is DAB’s new line of electronically switched submersible pumps for water pressurization in residential environments.
DAB DTRON Pump Models
- DAB DTRON 2 – Standard model without detailed interface.
- DAB DTRON 3 – Same as DTRON 2 but with added water level gauge and the ability for smart control using a COM BOX screen or a 'DConnect Box 3' connecting to a smartphone app.
DAB DTron pumps are 7-inch submersible electronic multi-impeller pump designed for use in wells, cisterns or tanks. It can be used submerged, partially submerged or installed on the surface with a DOC68 (supplied separately). The DTron is suitable for use in residential building services to increase water pressure, reuse rainwater in gardens or even irrigate small vegetable gardens. It integrates the electronics for automatic switching on and off, a double mechanical seal in an oil chamber, a non-return valve and a handle for transport. The electronic operation also protects against the dry run. The integrated expansion vessel protects from water hammer, an additional expansion vessel is not required. It is possible to connect a float without compromising the watertight of the pump thanks to the NFC (Near Field Communication) pocket.
DTRON Formats and Applications:
- DTRON DRY VERSION – For surface installation installed out of the water using Doc68 adaptor.
- DTRON STANDARD VERSION – For in-tank installations.
- DTRON X VERSION – For well installations, a floating pickup means dust and debris will no longer be a problem.
WRAS, ACS, NSF Approved.
More about this product
DTron 3 by DAB is a 7 inch submersible electronic multi-impeller pump designed for use in wells, cisterns or tanks. It can be used submerged, partially submerged or on the surface, with DOC68 (supplied separately). DTron 3 is suitable for use in residential buiding service to increase water pressure, reuse of rainwater and to water the garden or irrigate small vegetable gardens. DTron 3 integrates the electronics for automatic switching on and off. The suction height is adjustable from the bottom up to 8 cm. It is possible to connect a float without compromising the watertight of the pump thanks to the NFC (Near Field Communication) pocket. Com Box included, it allows to set the cut-in pressure and to control the alarms, it communicates with the pump through the PLC technology (PowerLine Communication), without other connection cables if not the electrical power.
TECHNICAL DATA
- Flow rate maximum: 7,5 m3/h
- Head up to: 45 m
- Maximum immersion depth: 7/12 m
- Type of pumped liquid: Clean, free from solid or abrasive substances,non-viscous, non-aggressive, non-crystallized and chemically neutral
- Free passage: 2 mm
- Minimum suction depth: 110 mm
- Minimum level of water: 35 mm
- Liquid temperature range: from +0°C to +50°C
- Minimum and maximum ambient temperature: <0°C / +50°C
- Maximum immersion depth: 15 m
- Set cut-in: 2,4 bar (±0,2)
- Flanges, thread: Thread 1” 1/4
- Pump maximum diameter: 185 mm
- Impeller/s material: Technopolymer/ AISI 304 stainless steel
- Maximum number of starts: 60/h
- Non-stop service: yes
- Protection class: IP 68
- Motor insulation class: F
- Power cable (m) and plug: 10/15 m with plug
- Single phase power input: 230 V 50 Hz
- Possible type of installation: Fixed, horizontal or vertical. Submergedor semi-submerged. It can be installed on the surface, under the waterlevel, or outside in a vertical position with the DOC68 accessory (supplied separately).
-
Instructions PDFDownload
-
Brochure PDFDownload
-
Data Sheet PDFDownload
Standard delivery:
Standard delivery is free for all orders except for some low cost/low margin items where standard delivery is £6.50. Some difficult to transport goods also have a varying carriage charge applied.
Please contact us for the estimated standard delivery times of the products that we have in stock, either by calling 01473 719950, or by dropping us an email at info@anglianpumping.com.
Deliveries will typically be made between 7am and 6pm, Monday to Friday (excluding public holidays).
Next day delivery:
Next working day delivery is available for a £15.00 + vat delivery charge.
Orders must be placed before 12 noon to qualify for next working day delivery. Orders placed after 12 noon on Thursday but before noon on Friday will be delivered the following Monday. Orders placed after 12 noon on Friday will be delivered on Tuesday.
Related products
Submersible sewage pump with a 40mm solids handling capacity. Cast iron construction suitable for pumping light domestic waste effluent septic tanks and large basements/cellars.
The Goliath Super is a robust sump pump made of stainless steel plate and fibre-reinforced plastic, resistance to corrosion. It also features a vortex impeller…
The DAB Grinder submersible cast iron pump with grinder for lifting water loaded with filamentous matter, paper or textile material, generally for use in domestic…
The Clarke PVP11A stainless steel pump ideal for heavy duty draining applications including pits, sumps, ditches, fottings etc. It can be used to remove both…
The Hippo 2 offers high performance at a low price, ideal for home and garden use this great submersible water pump will pump with 3,2mm…
The AP series of Grundfos drainage pumps are designed for temporary and portable installations, but can also be installed on a permanent free-standing basis. The…