DAB DTRON Pumps
DAB DTRON 2 45/90 WRAS (1~ 230V) – 60197683
In stock
- Established 1975
- Trusted by thousands of customers
DTron is DAB’s new line of electronically switched submersible pumps for water pressurization in residential environments.
DAB DTRON Pump Models
- DAB DTRON 2 – Standard model without detailed interface.
- DAB DTRON 3 – Same as DTRON 2 but with added water level gauge and the ability for smart control using a COM BOX screen or a 'DConnect Box 3' connecting to a smartphone app.
DAB DTron pumps are 7-inch submersible electronic multi-impeller pump designed for use in wells, cisterns or tanks. It can be used submerged, partially submerged or installed on the surface with a DOC68 (supplied separately). The DTron is suitable for use in residential building services to increase water pressure, reuse rainwater in gardens or even irrigate small vegetable gardens. It integrates the electronics for automatic switching on and off, a double mechanical seal in an oil chamber, a non-return valve and a handle for transport. The electronic operation also protects against the dry run. The integrated expansion vessel protects from water hammer, an additional expansion vessel is not required. It is possible to connect a float without compromising the watertight of the pump thanks to the NFC (Near Field Communication) pocket.
DTRON Formats and Applications:
- DTRON DRY VERSION – For surface installation installed out of the water using Doc68 adaptor.
- DTRON STANDARD VERSION – For in-tank installations.
- DTRON X VERSION – For well installations, a floating pickup means dust and debris will no longer be a problem.
WRAS, ACS, NSF Approved.
More about this product
7" submersible electronic multi-impeller pump designed for use in water wells, tanks or cisterns. The pump is suitable for use in residential building service for pressurization, rainwater reuse and gardening and irrigation. It integrates the electronics for automatic switching on and off, a double mechanical seal in an oil chamber, a non-return valve and a handle for transport. Electronic operation also protects against the dry run. Built with a innovative modular design: the hydraulic part, the motor, the electrical part and the filter can be disassembled separately, simplifying the maintenance activity. The suction height is adjustable from the bottom up to 8 cm using the special accessory supplied as standard. A float can be connected without compromising the water tightness of the pump thanks to the NFC pocket. The integrated expansion vessel protect from water hammer, an additional expansion vessel is not required. The cable has a quick coupling for easier installation inside the tank/cistern. The pump is also available in X version with 1" intake and kit X which includes 1 meter suction hose and float to prevent the suction of impurities from the bottom. The whole pump is classified as IP 68. With the accessory DOC68 (supplied separately) becomes a surface pump to be used under the water level.
TECHNICAL DATA
- Flow rate maximum: 7,5 m3/h
- Head up to: 45 m
- Maximum immersion depth: 7/12 m
- Type of pumped liquid: Clean, free from solid or abrasive substances,non-viscous, non-aggressive, non-crystallized and chemically neutral
- Free passage: 2 mm
- Minimum suction depth: 110 mm
- Minimum level of water: 35 mm
- Liquid temperature range: from +0°C to +50°C
- Minimum and maximum ambient temperature: <0°C / +50°C
- Maximum immersion depth: 15 m
- Set cut-in: 2,4 bar (±0,2)
- Flanges, thread: Thread 1” 1/4
- Pump maximum diameter: 185 mm
- Impeller/s material: Technopolymer/ AISI 304 stainless steel
- Maximum number of starts: 60/h
- Non-stop service: yes
- Protection class: IP 68
- Motor insulation class: F
- Power cable (m) and plug: 10/15 m with plug
- Single phase power input: 230 V 50 Hz
- Possible type of installation: Fixed, horizontal or vertical. Submergedor semi-submerged. It can be installed on the surface, under the waterlevel, or outside in a vertical position with the DOC68 accessory (supplied separately).
-
Data Sheet PDFDownload
-
Instructions PDFDownload
-
Brochure PDFDownload
Standard delivery:
Standard delivery is free for all orders except for some low cost/low margin items where standard delivery is £6.50. Some difficult to transport goods also have a varying carriage charge applied.
Please contact us for the estimated standard delivery times of the products that we have in stock, either by calling 01473 719950, or by dropping us an email at info@anglianpumping.com.
Deliveries will typically be made between 7am and 6pm, Monday to Friday (excluding public holidays).
Next day delivery:
Next working day delivery is available for a £15.00 + vat delivery charge.
Orders must be placed before 12 noon to qualify for next working day delivery. Orders placed after 12 noon on Thursday but before noon on Friday will be delivered the following Monday. Orders placed after 12 noon on Friday will be delivered on Tuesday.
Related products
ABS Robusta 200TS 230v auto/manual The Robusta 200 and 300 series have been designed for internal or external applications such as emptying containers and drainage…
The Clarke PVP11A stainless steel pump ideal for heavy duty draining applications including pits, sumps, ditches, fottings etc. It can be used to remove both…
The DAB Nova submersible pumps are designed for domestic use including basement drainage, cesspit water removal, ponds and fountains. Ideal for water up to 10…
The AP series of Grundfos drainage pumps are designed for temporary and portable installations, but can also be installed on a permanent free-standing basis. The…
Submersible pumps specifically designed for uses in narrow pits with dimensions down to 20 cm x 20 cm. Suitable to pump clear water containing particles…
The Clarke PSV1A water pump is designed particulary for heavy duty applications. This robust, powerful water pump is ideal for rapidly shifting both clean and…