Grundfos SP 240v/1ph Pumps
Grundfos SP1A-57 1ph 08102E57
In stock
- Established 1975
- Trusted by thousands of customers
Grundfos's range of SP 230v multi-stage submersible pumps guarantee a water supply which is reliable and efficient, ideal for raw water supply, groundwater lowering and pressure boosting.
Hydraulic design provides cutting-edge technology, constructed entirely from corrosion resistant stainless steel.
Grundfo’s high-quality engineering provides low long-term costs and high operating efficiency, with minimal maintenance.
These pumps are suitable for pumping clean, thin, non-aggressive liquids without solid particles or fibres.
More about this product
SP 1A-57
Submersible borehole pump, suitable for pumping clean water. Can be installed vertically or horizontally. All steel components are made in stainless steel, EN 1.4301 (AISI 304), that ensures high corrosive resistance. This pump carries drinking water approval. The pump is fitted with a 1.5 kW MS402 motor with sand shield, lip seal, water-lubricated journal bearings and a volume compensating diaphragm. The motor is a canned type submersible motor offering good mechanical stability and high efficiency. Suitable for temperatures up to 40 °C. The motor is not fitted with a temperature sensor. If temperature monitoring is desired, a Pt1000 sensor can be fitted. The motor is for direct-on-line starting (DOL).
| quid: | ||
| Pumped liquid: | Water | |
| Maximum liquid temperature: | 40 °C | |
| Max liquid t at 0.15 m/sec: | 40 °C | |
| Liquid temperature during operation: | 20 °C | |
| Density: | 998.2 kg/m³ | |
| Technical: | ||
| Pump speed on which pump data are based: | 2900 rpm | |
| Rated flow: | 1 m³/h | |
| Rated head: | 200 m | |
| Shaft seal for motor: | LIPSEAL | |
| Approvals on nameplate: | CE,EAC | |
| Curve tolerance: | ISO9906:2012 3B | |
| Motor version: | T40 | |
| Materials: | ||
| Pump: | Stainless steel | |
| EN 1.4301 | ||
| AISI 304 | ||
| Impeller: | Stainless steel | |
| EN 1.4301 | ||
| AISI 304 |
| Motor: | Stainless steel | |
| DIN W.-Nr. 1.4301 | ||
| AISI 304 | ||
| Installation: | ||
| Pump outlet: | Rp1 1/4 | |
| Motor diameter: | 4 inch | |
| Electrical data: | ||
| Motor type: | MS402 | |
| Type of motor: | CSCR | |
| Rated power – P2: | 1.5 kW | |
| Power (P2) required by pump: | 1.5 kW | |
| Mains frequency: | 50 Hz | |
| Rated voltage: | 1 x 240 V | |
| Rated current: | 9.8 A | |
| Starting current: | 450 % | |
| Cos phi – power factor: | 0.98 | |
| Rated speed: | 2860 rpm | |
| Start. method: | direct-on-line | |
| Enclosure class (IEC 34-5): | IP68 | |
| Insulation class (IEC 85): | B | |
| Built-in temp. transmitter: | no | |
| Others: | ||
| Minimum efficiency index, MEI =: | 0.70 | |
| ErP status: | EuP Standalone/Prod. | |
| Net weight: | 32 kg | |
| Gross weight: | 36.8 kg | |
| Shipping volume: | 66.8 m³ |
-
manual PDFDownload
-
data sheet PDFDownload
Standard delivery:
Standard delivery is free for all orders except for some low cost/low margin items where standard delivery is £6.50. Some difficult to transport goods also have a varying carriage charge applied.
Please contact us for the estimated standard delivery times of the products that we have in stock, either by calling 01473 719950, or by dropping us an email at info@anglianpumping.com.
Deliveries will typically be made between 7am and 6pm, Monday to Friday (excluding public holidays).
Next day delivery:
Next working day delivery is available for a £15.00 + vat delivery charge.
Orders must be placed before 12 noon to qualify for next working day delivery. Orders placed after 12 noon on Thursday but before noon on Friday will be delivered the following Monday. Orders placed after 12 noon on Friday will be delivered on Tuesday.
Related products
SP 1A-21 Submersible borehole pump, suitable for pumping clean water. Can be installed vertically or horizontally. All steel components are made in stainless steel, EN…
Grundfos's range of SP 230v multi-stage submersible pumps guarantee a water supply which is reliable and efficient, ideal for raw water supply, groundwater lowering and pressure…
Grundfos's range of SP 230v multi-stage submersible pumps guarantee a water supply which is reliable and efficient, ideal for raw water supply, groundwater lowering and pressure…
Grundfos's range of SP 230v multi-stage submersible pumps guarantee a water supply which is reliable and efficient, ideal for raw water supply, groundwater lowering and pressure…
Grundfos's range of SP 230v multi-stage submersible pumps guarantee a water supply which is reliable and efficient, ideal for raw water supply, groundwater lowering and pressure…
Grundfos's range of SP 230v multi-stage submersible pumps guarantee a water supply which is reliable and efficient, ideal for raw water supply, groundwater lowering and pressure…